Automatic Garlic Peeling Machine is used to peel garlic cloves or remove garlic clove skin. Romiter Garlic Peeling Machine adopts a pneumatic principle, which will not damage the garlic during peeling the garlic skin. Garlic Peeling Machine can peel the garlic skin completely in a dry way, so there is no need to put the garlic in the water before peeling. The peeling rate could up to 95%. The garlic peeling machine can be used in food processing factories, restaurants, etc.
For Pneumatic Garlic Peeling Machine, Romiter Machinery provides two types: Cylinder Drum Type Garlic Peeling Machine and Chain Type Garlic Peeling Machine
Table of Contents
1. Cylinder Drum Type Garlic Peeling Machine
Cylinder Drum Type Garlic Peeling Machine adopts the pneumatic compressed air blow in the drum which can peel the shell of the garlic clove without soaking in water. The whole garlic clove is put into the hopper and into the stainless steel barrel, where the vertical shaft with the rubber pad rotates will close to create on closed space for garlic peeling. the garlic skin is blown off and dropped. The blower fan is placed near the outlet and the garlic skin is blown to the dust collector through an aluminum tube. The peeling rate can reach 95%. This machine is suitable for dry garlic peeling processing, no need for water. Stainless Steel Garlic Peeling Machine is widely used in restaurants, hotel, vegetable processing plants, condiment factories, large wholesale vegetable markets, etc.
Feature of Cylinder Drum Type Garlic Peeling Machine
- The garlic peeling machine uses a dry peeling method.
- The machine uses a dry pneumatic principle and needs an air compressor matching it to achieve the peeling work.
- It has low energy consumption and non-pollution and is damage-free.
- The peeled garlic clove conforms to the hygiene standards.
- The special design makes sure that the garlic is no friction with the blade during peeling. So you could get the garlic in good condition, low breakage, smooth surface, and non-pollution.
- It is equipped with Auto-temperature control and conveying material, and the garlic could be stored for a long time
- Full automatic line with drying, peeling, practical, economical, and high production efficiency.
- And it is easy to keep maintenance, low failure rate, etc.
- High automatic, one person for several machines, Steady performance, practical, safe and easy to operate.
Specification of Cylinder Drum Type Garlic Peeling Machine
| Model | RM-ST30 | RM-ST100 | RM-ST200 | RM-ST300 | RM-ST500 |
| Power(kw) | 0.3kw | 0.5kw | 3.2kw | 4.7kw | 500w |
| Compressed Air(m3/min) | 0.25 | 1.05 | 2 | 3.5 | 5 |
| Air Pressure(Bar) | 8 | 8 | 8 | 8 | 8 |
| Dimension(mm) | 500*530*850 | 600*600*1250 | 650*950*1750 | 850*850*1650 | 1000*1000*1800 |
| Capacity | 30-50kg/h | 100-150 kg/h | 200-300kg/h | 300-500kg/h | 1000-1500kg/h |
Working Video of Cylinder Drum Type Garlic Clove Peeling Machine
2. Chain Type Garlic Peeling Machine
High Capacity Garlic Peeling Machine is used for garlic clove peeling. it has a large capacity which can reach 1ton-1.5ton. Generally, it is used for dehydrating garlic granule production line or garlic powder production line. Chain type dry garlic peeling machine powered by compressed air, using bin peeling structure, installation whirling airflow over the peeling warehouses, large garlic peeling into the warehouse through the chain of transmission, to achieve separation in the peeling garlic skin warehouse. During Peeling, the garlic clove is fixed in the rolling bar, which makes sure the garlic clove does not punch with the rolling bar and protects the garlic clove.
Specification of Chain Type Garlic Peeling Machine
| Model | RM-GP300 | RM-GP1000 | RM-GP2000 |
| Power | 1kw | 3kw | 5.5kw |
| Capacity | 0.3t/h | 1t/hr | 2t/h |
| Air Compressor | 24kw | 64kw | 132kw |
| Dimension | 2200*400*1100 | 2850*500*1500 | 3000*500*1600 |
| Weight | 250kg | 500kg | 700kg |
Working Video of Chain Type Garlic Clove Peeling Machine
3. Cylinder Drum Garlic Peeling vs Chain Type Garlic Peeling Machine
- Garlic Dry Condition: Cylinder Drum Garlic Peeling Machine has a high requirement for garlic dry condition, if garlic is wet, with a cylinder drum garlic peeling machine, we can not get peeling results. Chain Type Garlic Peeling Machine can suitable for a little moisture content garlic.
- Garlic Size: Cylinder Rum Type Garlic Peeling Machine need to adjust the feeding inlet size according to different garlic size. Chain Type Garlic Peeling Machine does not need to adjust. It is suitable for all size garlic.
- Garlic Damage: Cylinder Drum Type Garlic Peeling Machine peeling garlic by compressed air, during peeling, the garlic clove will punch with the cylinder drum(pushed by compressed air), so the garlic oil in the garlic clove may get out from the garlic and a little damage happen. Chain Type Garlic Peeling Machine peeling garlic which is fixed in the rolling bar. This makes sure it does not punch with the surface and avoid damage.
- Garlic Application: Because of low cost, Cylinder Drum Type Garlic Peeling Machine is widely used in Garlic Slice, Garlic Powder, Garlic Granule Production Line. For Chain Type Garlic Peeling Machine, It can also be used for garlic clove production line, which gets a clean garlic clove without any damage.
FAQ for Garlic Peeling Machine
Whether Garlic Need to be Splitted Before Garlic Peeling
Yes, The garlic need to splitted as single clove, then can use garlic peeling machine to peel.
Whether Peeling Machine will Damage the Garlic Clove
Not, The Garlic Peeling Machine adopt pneumatic powder, which adopt high pressure compressed air to peel the garlic. it do not like mechnical type, which punch the garlic. So the garlic clove will not damage during garlic peeling.
What other need for Garlic Peeling Processing
Garlic Peeling Machine need compressed air to work and electricity. if customer do not have Air Compressor, we can help to purchase air compressor.
Whether fresh harvested garlic can be peeled
Not, For Fresh harvested garlic, the peel is wet and sticky with the garlic clove very tight. You need to dry the garlic undersunshine for some days. Then our pneumatic garlic peeling machine can complete the peeling processing.
What capacity garlic peeling machine you have.
We have garlic peeling machine capacity range from 30kg to 2000kg per hour. We can also customized garlic peeling machine according to customer requirement.
Company Profile
Romiter Machinery Co., Ltd. is a market-leading designer and a manufacturer of Garlic Processing Machine with 10 years’ experience. In the past 10 years, we focused on researching and designing the machinery which could process the garlic into different types. Romiter Garlic Processing Machine meat Europe Quality Requirement. with CE Certification
Romiter Group provides a complete Garlic Processing Solution, which includes Garlic Peeling Machine, Garlic Clove Separating Machine, Garlic Clove Separating and Grader Machine, Garlic Cleaning Machine, Garlic Concave Cutting Machine, Garlic Juicer Extractor Machine, Garlic Mesh Bag Packing Machine, Garlic Mesh Bag Clipping Machine, Garlic Powder Production Line, Black Garlic Fermenting Machine, Garlic Weighting Packing Machine, Garlic Grader Machine, Garlic Root and Leaf Cutter Machine and Garlic Harvester Machine
Romiter Group can provide customized products for customers. Welcome to contact us for more information.
